Blissframe
A display that you set up yourself and take away again when you’re finished.
Buy one plinth and then simply swap out your statue, one at a time.
A striking display piece in the shop, at a trade fair or outside by the entrance.
In brief
- Indoors or outdoors
- It depends on the material
- Thickness or weight
- 1.7/3 mm / 3/5/10 mm
- Largest single-piece size
- 1600 by 2600 mm / 2030 by 3050 mm
- PVC-free
- In one of the performances
- The most environmentally friendly choice
- EE corrugated cardboard, 5 by 5the other materials on this page score lower
- Available to order from
- From 1 item in the ordering module
The eco-score is our own assessment of the material’s environmental footprint, on a scale of 1 to 5. It says nothing about quality, and the material must be recycled under the right conditions. Several materials may be listed on this page. We list the material with the lowest environmental footprint, not an average.
Order Blissframe
Select your version. You’ll be taken straight to the calculation tool, where you can enter the size and quantity yourself and see the price straight away.
- Permanent metal plinth2 versionsCalculate price
- Indoor sleeve2 versionsCalculate price
- Outdoor sleeve – hollow-core slabCalculate price
- Outdoor sleeve – PalboardCalculate price
Orders are placed via printvis.be, our own ordering system. There, you can calculate the price based on your chosen size and quantity. You create your own design using the editor within the system, so you do not need to provide a print-ready file.
Frequently asked questions about blissframe
What’s the difference between this and a roll-up?
With a roll-up, the fabric and cassette are attached to each other, so when you launch a new campaign, you usually replace the whole unit. With a Blissframe, you buy the metal base once and then simply swap the sleeve containing your visual. That is why customers who frequently change their message opt for this system.
Can a Blissframe be left outside?
Yes, that’s what the 1700 mm high outdoor sleeve is for. In this case, the graphic is made of plastic rather than cardboard: 150-gram polypropylene roll-up material, PVC-free, which can withstand outdoor conditions. The 300-gram cardboard graphic is for indoor use only.
Do I have to buy a new plinth every time?
No, that’s precisely the idea. The plinth is permanent and stays in place; you simply order a new sleeve when your campaign or image changes. That way, you only pay for the most expensive component once.
Can I hire the plinth instead of buying it?
That’s possible, for up to five working days. This hire option is listed as a separate option in our ordering module. For a trade fair or an open day lasting a few days, this is often the cheapest option.
What sizes are available?
For indoor use, you can choose between a sleeve 1,600 or 1,800 mm high; for outdoor use, it is 1,700 mm high. All three are 500 mm wide and 100 mm deep. It is therefore a narrow, freestanding display, designed to be placed next to a passageway or in the line of sight.
How long does the visual last?
Our product data sheets do not specify a service life in months or years, so we do not mention this here. What is clear, however, is that the cardboard inner structure is not intended for outdoor use, whereas the plastic visual element is. If you let us know how long the display is to remain in place, we will recommend the most suitable version.
Do I fit the display myself?
Yes. The system is portable and easy to assemble; you don’t need a team to do it. If it’s a full stand build where this display is just one component, then our team can come to the venue.
What if I need a full back panel?
In that case, a Blissframe is too narrow. For a wall behind your stand, you should consider a Zipper Wall, where a printed fabric is stretched over an aluminium frame. You could then place a Blissframe next to it, as an accent at the entrance to the stand.
What is the largest size?
The sleeve is 500 mm wide and up to 1800 mm high. If you need a full back wall, you’ll need a zipper wall or a pop-up wall.
What about the environmental aspect?
The cardboard indoor display scores 4 out of 5 and goes into the waste paper bin; the outdoor display scores 2 out of 5 and is PVC-free. The stand is made of metal and remains in place, so you only need to replace the sheet for each campaign.
Description Blissframe
If your shop or trade fair stand has a new promotion every few months, you’d rather not have to buy a completely new display every time. With a Blissframe, you pay for the metal base once and then simply swap out the sleeve containing your visual whenever the message changes. The whole unit is portable and easy to assemble, so you can place it exactly where you need it and take it away again when you’re done. For indoor use, we use cardboard; for outdoor use, we use plastic that can withstand a downpour. If you’re looking for a display that rolls itself up and fits into a tube, take a look at roll-up banners. If you need a full-height wall behind your stand, you’re better off with a zipper wall.
Images of Blissframe
How Blissframe order?
Looking for the best price/quality for your desired product? Don't wait any longer to get your personal price on point. Choose from the following three options to quickly receive your price.
- Visit our webshop: Do you know exactly which product you need? Log in as a guest or registered user to calculate your price and order.
- Send a price request: Do you have specific or different needs? Fill in our quotation form carefully and receive your personalised quotation by e-mail.
- Take telephone contact: Would you like more info on your desired product? Contact our staff for free top advice by phone.
Creafor clients rate their collaboration with 5 stars as standard, see our reviews on google.
Materials for Blissframe
Indoor sleeve, 1600 or 1800 mm high
Five hundred millimetres wide and 100 millimetres deep. A narrow upright that takes up very little space yet is at eye level.
Outdoor sleeve, 1700 mm high
Same width and depth. For outdoor use, the graphic is made from 150-gram polypropylene roll-up material, PVC-free, with a grey backing to keep it flat.
Buy or hire a pedestal
A permanent metal plinth, available to buy or hire for up to five working days. It is this option to hire that makes this system an attractive choice for a one-off event.
The visual
- For indoor use, made from 300-gram sulphate board, EcoScore 4 out of 5
- For outdoor use, made from 150-gram polypropylene, PVC-free, Ecoscore 2 out of 5
- Can be printed up to 1.2 metres wide
Good to know
- From a section in the order module
- The base stays the same; you just replace the graphic
- Do-it-yourself
Applications of Blissframe
What our customers use it for
- an in-store promotion that changes every few weeks
- an exhibition stand where you set up and dismantle the display yourself
- a display next to the entrance to your shop
- a product demonstration in the showroom
- an open day for which you’ll only need the plinth for one weekend
- a seminar or information evening in a hall
- a promotional display that has to be put back in the car afterwards
- a notice outside, next to the door, which has to be able to withstand all weathers
Other displays
The Inhaker, Product displays, Clixpo®, Leaflet displays, Milling objects and Ipad display.
Other displays
